Trunk Paint

How To Use

• Usage
  Trunk interiors, speaker boxes, audio components and more
• Prep
  The surface must be dry and grease, wax and oil free. Use Dupli-Color prep products to clean the surface. All rust and corrosion must be removed prior to painting. The surface must also be scuffed if it is glossy. Paint will not bond to a glossy surface. Mask off any surrounding areas to protect from overspray always use a drop cloth or plastic under the paint project.
• Application
  To spray, hold can parallel and 12-15 inches from the surface to be painted and use in an even, sweeping motion. Apply several light coats with 5 minutes in between each coat until surface is evenly coated. Dries to the touch in 30 minutes, and can be handled in 1 hour. Can be recoated at any time. For best results on trunk interiors, clean and degrease areas thoroughly before application. Spray surface with long even strokes. Repeat process until smooth, even color has been obtained. After each use, invert can and spray until clear gas comes out. If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT insert pins or wire into nozzle or can opening. Discard empty can in trash pick-up. Do not burn, incinerate. Or place in trash compactor.
• Clean Up Disposal
  Use regionally compliant cleaner for cleaning purposes