Premium Truck Bed Coating

How To Use

• Usage
  Truck Bed, cargo areas, step bumpers, running boards, vehicle body panels and trim
• Prep
  Clean truck bed and tailgate using a stiff brush or pressure washer. Use a strong household cleaner or grease and wax remover to thoroughly remove oils, chemicals, or other contaminates. Rinse clean and let dry. Mask off all hardware, drain plugs, and areas of the truck bed and tailgate to which you do not want Premium Truck Bed Coating to adhere. Sand all areas to be painted with coarse sandpaper (80-180 grit) or equivalent for maximum adhesion. Wipe down truck bed and tailgate again with grease and wax remover to remove sanding residue.
• Application
  Shake until ball inside begins to rattle, then shake for an additional 2 minutes. To spray, hold can 10-12 inches from surface and use in an even, sweeping motion, overlapping each stroke. Apply 2 light coats, allowing at least 10 minutes between coats.
• Clean Up Disposal
  Use regionally compliant cleaner for cleaning purposes